$7.99 per box

Shipping in Cash – Minimum Order 200 

Expire December 2022

Use

Follow the steps outlined below to use FlowFlexTM antigen rapid tests:

1. Wash your hands and disinfect the surface where you will be working.
2. Remove the kit from its packaging and read the instructions.
3. Remove the cap from the extraction buffer tube and place it upright in the tube holder.
4. Insert the swab into one nostril up to one inch.
5. Rotate the swab five times and use the same swab to repeat this process in the other nostril.
6. Place the used swab in the extraction buffer tube and stir the swab for at least 30 seconds.
7. Squeeze the sides of the tube over the swab at least five times to remove more of the sample.
8. Remove the swab and dispose of it safely.
9. Place the cap back on the tube and swirl the tube to mix the fluid thoroughly.
10. Remove the white cap from the tube, leaving the blue cap on, and drop four drops of the fluid onto the test well of the cassette.
11. At 15 to 30 minutes, read the results window of the cassette. Do not read after 30 minutes.